Відео

What is the liquid being used in the spray?

Instacling is the best kind to use for beginners

Thanks for the tip came right off and no glue 😅

Thanks for the diy tip.The tint came right off ❤

That's pretty dope! Last year I used the heat gun method and that worked pretty good except I couldn't get it to come off in one piece like you did here. Well, its that time again and the tint's gotta come off. I'm gonna try this. Thank you!

I have to be stupid or this is BS I've removed tint few times now with the ammonia and black plastic trick soapy detergent and black bag leave outside 3 hours in Aussie summer got sun still leaves all glue behind, tried steamer and hair dryer combined all methods the glass has that hot I couldn't touch it especially with the steamer method Please help am I doing something wrong I see you guys peeling tint back with glue unless it's fresh tint maybe or it's BS or I'm just unlucky as Tried this 4 times now on older vehicles that's tint on for minimum 5 years, over my course of owning vehicles as I hate old tint looks nasty So what am I doing wrong or is this just BS. Hahaha help a brother out

Thank you very much for the advice. It worked perfectly, I used water with rinseless wash p&s absolute and it came off without any problems. The installers who put the film scratched my film and also the rear window. Any solution to repair the scratches on the rear window without changing it?

This was an excellent video. I think I'm going to give this a shot on my Fusion. Hopefully by the time I do my 4 windows, I'll be confident enough to tackle the rear window. None of the windows came with any factory tint on them.

Can it be done on double panes windows? Also what’s difference between Platinum & Titanium series, which is better? Thanks in advance. Btw, it’s an awesome information in this video.

What does he wet it with

Never used a sharpie making it to difficult

Thanks for the video. Im going to try doing my front glass door that faces the afternoon sun.

Is it true that you can't tint dual pane cause it will crack the window?

I notice that you use paper verses plastic/vinyl transfer tape, is there a difference why?

Thank s u are an 100 times best vidéo, i m in Montréal, nobody calls back im good for next heatwave next week just because of u , God bless u!

Worked nicely for me. I used stiff thin cardboard from some pastry boxes to force the trash bag between window and seal which holds bag film firmly against the glass.

Trying to get 25 yr old tint off my 95’ Honda civic. First layer came off. Gotta work on the adhesive 😖

Interesting, I watched the whole thing even though I won't tint my car windows. Great video, sure to benefit many!

There’s no policy about owner turning in the car free of clutter for liability reasons in general?

How much does it cost to have tint removed?

Good afternoon! How much J&J shampoo do you usually add to your gliding solution?

Is it two bulbs inside there?

OMG!!! I can’t believe how easy it was!! Thank you, Thank you, Thank you!! 😇 You are an Angel!! I am a 65 years old woman that wanted to save money. I can’t believe I did it myself. I tried one window first, to be sure it worked. If I flopped I was going to bring it to a shop anyway and pay $150 minimum to remove it. It took me a lot more time because I was not well organized and a little clumsy. I also chose a windy day thinking it would be more comfortable, But the plastic kept blowing off and drying the window. Anyway I stuck with it and once I got the hang of it , zoom-zoom, 10 minutes in the sun and what a piece of cake! Catching the edge with both layers of the film to start was the hardest part, and it really wasn’t that bad. Just have to take your time. I’m thrilled it can off perfectly and I not only saved money, I also impressed myself and hold bragging rights!! Everyone told me not to do it. Ha!! They don’t know me! lol I’m so proud of myself. Thank you again for sharing your secrets. YOU ROCK!!

Beast video, will you be doing a camparison between 2 staging and sweeps removals for new people like whatvif we break something along the way wtf do we do and not with enough experience pulling panels off 2 staging looks like the better option but comes with contamination if you make a video based on that bias would be appreciated from a experienced window tiner

I just did this on my crv wow this saved me money!! And under an hour too which is so awesome !!

Did this today with about 75 degree weather .. it does work and it helped save 200$ - out of nyc 🗽

super lo haré en mis carros

Same material, same process, same faces and it keeps pulling away from the window. Any suggestions?

Bars!!!! 💯💯💯

Thank you for this video. I am trying to tint the windows in our camper and I told my husband I could handle it haha and then I started and realized I had no idea what the heck I was doing! Your video was great! Great explanation and covered all the bases. Thank you so much!

I just used this method today. Worked kike a charm. No adhesive left behind. Thank you so much for this video.

Very nice tutorial my guy.

Where do i get one of those fluro knives from?

You put the rear window on with the liner facing the inside? Isn't the liner on the adhesive side that's supposed to apply to the window glass?

Hey man what a Great DYI video. Now show me on a Beetle. That F-ing car is my nemesis.

Great video! Any tips on front and rear quarter windows? Really struggling with them. Thanks!

I would not recommend using paper towels to clean the window, it can leave contaminates, I always used lint free towels, I also used canned air to blow out the edges first and then a lot of spray around the edges to pull out any dust... also when setting the film you can set the factory long edge vs the short to minimize cutting and reduce mistakes...but overall not a bad tutorial.

I would say this is one of the best teaching videos

the first video that makes me feel as if i can do my front windows on my own and properly! thank you sir, true master of your craft

Nicely done

Thx for sharing this. I have to remove the 4 yr old tint in my car for it to pass the strict MA. state inspection. I think mine is darker than their minimum required 35 pct.

Brilliant! Thanks for the video!

I had 5% on my Impala but I think I'ma do all 15 cuz at night it's so hard to see and the cops love messing with ppl in Florida

I have a vintage Thunderbird, and was quoted $450.00 to do my car here in Florida. This well-done video has me thinking that I can diy my car. I’m excited! I’m going to go for the old-school look, mirrored tint. It’s what most of the cars had when I moved here in the 70’s. 1979…here I come!

Did I miss the part where you show it from the outside?

This tutorial put him out of business

Cool video, but I’d still much rather pay a shop for professional work; I don’t trust myself.

20 min? That's so long OMG, i can't do a job that long, i won't make it.

Hello, what do you use for a slip solution and what brand of film do you install? Great info. Thank you

This is a great video!!! Do you have a video that shows how to remove old film and glue from a car's window?